Operating the Keypad
10
How to Arm Partitions
The protected area can be grouped into 2 separate partitions (
A
or
B
). The system can be
grouped for User‘s convenience to separate, in a business environment, the offices from the
warehouse area, or in a private residence, the house from the garage or workshop, etc.
To Arm partition A enter, user PIN Code for partition A
To Arm partition B enter, user PIN Code for partition B
Note
: to Arm a partition with a
PIN Code,
see page 7 “How to arm the system before exit”.
During exit delay you can leave premises. At the end of the procedure, the following writing
lights up at the screen to indicate that the system is armed:
Armed A
– for Area A, and
Armed B
– for Area B.
To disarm partition, see "Disarming the System" on page-8.
How to Bypass Zones
Bypass any zone that cannot be closed. You can bypass selected zones prior to arming. It is
also used to temporarily exclude a faulty zone from service which requires repair.
To bypass a selected zone, press the
button, which is assigned by default to perform the
<
BYPASS
> function, enter the Zone Number you want to Bypass then press
.
To Exit the
Bypass mode, press
.
The <
BYPASS
> function can be assigned to any of the following buttons
,
,
,
.
Another method to bypass is by entering MENU screen
and scroll down until the bypass
option.
Option 1:
At this case the
(default)
Button assigned to operate bypass.
