Set Arm/Disarm Chirps/Flashes
Siren Chirps
1.
Connect Open Collector Output 1 (on the receiver board) to Output 1 in parallel with
the sirens on the Runner Panel.
2.
Arm: the siren beeps once; Disarm: siren beeps twice
Strobe Flashes
1.
Connect Open Collector Output 2 (on the receiver) to Output 2 in parallel with the
strobe on the Runner Panel.
2.
Arm: the strobe flashes once; Disarm: the strobe flashes three times.
NB: The new combination siren & strobe unit with the strobe light made up of high
intensity LED’s must be used in conjunction with this feature for accurate flash counting.
Specifications:
Transmitter
Operating Range: A minimum of 200m (open air)
433.92 MHz Keeloq Code Hopping; 4.3 billion combination
SAW resonator (filter) locked (+/- 75KHz)
Transmitting power: <10mW
Operating Voltage: 6 V supplied by two 3 VDC lithium batteries
Battery Life: A minimum of 4 years under normal operating conditions with the
recommended battery types: CR2032 from Everyday, Duracell, Malak or Panasonic
Current: 1uA standby; 12mA operating
Low battery indication: LED on the remote flashes when the button is pressed
Auto shutoff: the remote stops transmitting if a button gets pressed for 25s.
Receiver
Operating voltage: 9-15VDC
ASK Superhet technology
Outputs:
Data – Arm (away), Arm (stay), Disarm and Panic. 4-wire harness provided
Two programmable Relays; rating 1A 24VDC or 120VAC
Two Switch to Ground outputs to verify Arm/Disarm; rating 1A
LED indication
Reverse power connection protection
Standard capacity: 25 remotes. Larger capacity version available on request
