For any further information please contact call us on:
0345 873 8840
Or visit our web-site at:
www.bauhaus-bathrooms.co.uk
© Crosswater Copyright:
No part of this document may be reprinted or duplicated without
Crosswater Holding's consent. In the interests of continued
product development Crosswater Holdings reserves the right to
alter specification without prior notification. E & OE.
To turn illumination on touch the sensor once.
To turn illumination on touch the sensor once.
To change the colour temperature, touch and hold the
sensor until desired light temperature warm or cool is
obtained.
The colour temperature is then set until changed again.
To turn illumination on or off, wave your hand under
the sensor switch located at the bottom of the mirror.
The heated pad will operate when the light is illuminated;
The heat pad will work if the mirror lamp(s) expire.
Once turned on the heating pad will warm the mirror and
clear the surface of condensation.
A
++
A
+
A
B
C
D
E
L
E
D
LED
Mirror
This luminaire
contains built-in
LED light strips
The lamps cannot be changed
in the luminaire.
874/2012
Energy label
4.