Waste Electrical & Electronic Equipment Regulations (WEEE) requires that any electrical products showing the mark
above must not be disposed of with other household or commercial waste. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate any such product from other waste types and recycle it responsibly at your
local facilities. Check with your Local Authority, Recycling Center or retailer for recycling advice.
CARE & MAINTENANCE
Add sentence:
LED light strips last for thousands of hours under normal domestic use, in the unlikely event that the LED light strip shouldfail please
contact customer services for a replacement part.- write this in bold type face.
Do not strike/hit glass components with hard or pointed items. Do not place very hot or very cold items against or in close proximity to
glass surfaces unless a suitably thick insulation material is used.
The nominal thickness of the mirror glass used in this product is 5mm and is safety film backed in accordance to BS:EN6206 for your
safety. If the mirror glass becomes chipped or broken, replace immediately. For details on replacement mirror glass and other
components contact customer services.
Cleaning:
The mirror edges are treated with a specially formulated sealant designed to protect the mirror edges from contaminants and
discolouring. Failure to follow cleaning guide-lines can/will remove the benefits of the sealant.
NEVER use products containing bleach, cleaners of a gritty or abrasive nature or so called “glass and mirror” cleaning products, that
can be detrimental to the long lasting finish of the mirror.
ONLY use a clean micro fibre cloth to clean the mirror and mirror frame.
Colour Coding:
L - Live = Brown
N - Neutral = Blue
Earth = Green & Yellow
THIS PRODUCT IS MANUFACTURED TO CLASS I
CATEGORY AND MUST HAVE AN EARTH CONNECTION
Hang the mirror onto brackets.
Apply a bead of clear silicone sealant on all sides between the mirror
frame and wall surface. Allow to dry for 24 hours.
Reconnect the electrical power supply.
OPERATING INSTRUCTIONS - SEE PAGE 4
To turn the mirror lights on or off, activate the switch by passing your hand over the sensor.
Remove protective film from the mirror face, and clean as directed
below.
STEP 3
STEP 4
Tube Type
Model
Led Parameter
Led Driver
WF6060
69X2 Leds / 0.06W / 6400K
117 Leds / 0.06W / 6400K
312 Leds / 0.06W / 6400K / 4000K
42 Leds / 0.2W / 6400K / 4000K
15W
15W
15W
MET6080
MEA6080
Remove the cover from the electrical connection box. Using a
suitable terminal screwdriver make secure connections as follows:
Live Terminal
Connection
Earth Terminal
Connection
Output Wires
Neutral Terminal Connection
3.