CROSSRUNNER 50 ATV
ReAssembly Guide
8.
Install handle bars with the bolts and hardware provided. See
that knurled areas on handle bars are evenly spaced between the two
halves of the pinch mount supports. Lightly snug attaching bolts and
then position handle bars at the desired angle best suited for the
comfort and safety of the rider so that all hand controls are easily
accessed and operated. The angle of the hand controls is adjustable, as
well, by loosening the screws on the underside of the control and
pivoting to the desired position, then tightening screws. Turn wheels to
full left and full right positions to assure adequate clearance for the
rider’s legs and to check for binding cables or wiring. Finish tightening
handle bar mounting bolts evenly in a criss-cross pattern and torque to
28 Ft/Lbs.
Step8-Fig1-Torque handle bar bolts
Step8-Fig2-Adjust hand controls
9
