CROSSRUNNER 50 ATV
ReAssembly Guide
Step18-Fig3-Brake fluid reservoir
19.
IMPORTANT! To start ATV, make sure parking brake is set, move
choke lever to closed position, hold front brake lever in, turn ignition
key to on position, flip start switch to run, push yellow start button to
engage starter. If engine does not spin over it may be necessary to push
the “energize button” on the remote kill switch, watch for the RED
light on the remote, then engage starter button.
Step19-Fig1-Remote kill switch
20.
After ATV is started, closely inspect for any fuel or oil leaks.
Confirm that parking brake holds adequately with moderate power
applied.
18
