CROSSOVER
ANCHORS
PERMANENT ATTACHMENTS FOR WALLS & SQUAT RACKS
The Crossover Anchors provide a permanent workout station that can safely secure the Crossover Cords.
The Crossover Anchors can be installed into concrete as well as metal studs. We do not provide
instructions for these installations as they can vary based on the situation. A licensed professional is
recommended for all installations.
For additional questions, please contact us at
© 2017 Crossover Symmetry
WARNING
: IT IS HIGHLY RECOMMENDED THAT THE CROSSOVER ANCHORS ARE INSTALLED BY A LICENSED PROFESSIONAL.
IMPROPER INSTALLATION MAY RESULT IN INJURY OR DEATH. READ ALL INSTRUCTIONS BEFORE BEGINNING. PRIOR TO USING,
ALWAYS CHECK THE CROSSOVER ANCHORS TO ENSURE THEY ARE STRONG & SECURE. IF ANY DAMAGE, WEAR, OR DEFECTS
ARE FOUND, DISCONTINUE USE OF THE PRODUCT. ALL CROSSOVER SYMMETRY EQUIPMENT IS INTENDED TO BE USED ONLY
IN THE MANNER SHOWN IN THE INCLUDED INSTRUCTIONAL MATERIALS. CONTACT US AT SUPPORT@CROSSOVERSYMMETRY.
COM WITH ANY QUESTIONS REGARDING THE EQUIPMENT OR ITS INTENDED USES.
TOOLS NEEDED:
In order to install the Crossover Anchors you will need a tape measure, pencil, power drill, a socket
set, and 1/8
"
drill bit (for wood stud installation).
2
INCLUDED HARDWARE:
(1 SET)
1
C
8
A
8
B
2
D
8
E
8
