CCpilot X1400
Product revision: 1.0
Technical manual
2022-12-20
www.crosscontrol.com
3
1.
Introduction
CCpilot X1400 is the fifth generation of the CCpilot XL family. A high-performance PC-based
onboard display computer and controller with a rich set of integrated functions. With its powerful 8
th
generation Intel® Core i-5 CPU it is an open platform that facilitates easy implementation of
premium user interaction, reliable controls and integrated fleet management. This technical manual
and reference handbook provides important information regarding the hardware and basic usage.
For software and operating system specifics please see additional documentation.
1.1.
Product Models
This documentation is applicable for all standard product models of CCpilot X1400.
The platform also enables customization of hardware and software.
1.2.
Conventions and Definitions
The ‘exclamation’ symbol - - is used to highlight information that is especially important for the
end-user.
1.3.
Identification
On the side of the CCpilot X1400 device there is a label containing version and serial number to
identify your unique computer. Take note of them. During service and other contact with the
supplier it is important to be able to provide this information.
1.4.
Maintenance and Care
Handle the device with care and pay attention to the following handling directives:
•
Disconnect all cables to the device during welding or when performing other service to the
machine imposing a risk of damaging electronic devices.
•
Service and repair to the device shall only be made by authorised personnel. If the device
is opened by unauthorised personnel, its warranty is void.
•
Scratches, or even damages, to the display occur easily if it comes in contact with a sharp
object or hard material. In order to increase the longevity of the screen, this should be
avoided.
•
The Flash memory used for storage is durable; however as with all flash memory types the
write cycles are limited. Avoid unnecessary writing to the flash memory.
•
If the unit becomes too hot it will operate at a limited speed and can also be damaged.
Therefore, do not cover the unit by, for example, hanging a jacket or other clothes on it.
•
Consider traffic safety when CCpilot X1400 is installed and whenever it is used.
CrossControl does not recommend that CCpilot X1400 or its accessories is used actively
by the driver when a risk of injury to people, or damage to property, is present.
•
Be advised that the device consumes power from the vehicle battery. This can result in the
inability of the vehicle to start if the on-board computer has been on for a period of time
without the vehicle engine running.
