TABLE 1.0 4116-T21-310212
Multi-Band Block Translator
Specifications (continued)
Controls, Indicators
Green LED
Power
Gain, band select and internal 10 MHz frequency via
Ethernet M&C or Status/Control Connector
Gain, Band, 10M Frequency
Red LED, External Contact Closure
PLL, Alarm
Other
**+0 to +50 degrees C; Specifications subject to change without notice.
100-240 ±10% VAC, 47 - 63 Hz, 25 watts maximum.
Power
8” Wide X 6” High X 16” Deep, Weather Resistant* Enclosure.
Size
Status/Control Connector, MS3112E14-18S; Mating Cable Connector,
MS3116F14-18P.
Ethernet Conector, RJF21B; Mating Cable Connector, RJF6G;
Cable interface, Standard RJ45.
AC Input Connector, Clipper Series, CL1M1102, Mating Cable Connector, CL1F1101.
(Unless otherwise specified, the mating connector is provided preassembled onto a standard
NEMA 5-15 U.S. power cord.)
Weather Resistant*
Connectors
SMA (female), 50
Ω
10 MHz Connectors
2.92 mm / Super SMA
RF In / RF Out Connector
*Weather Resistant enclosures are
designed to be water resistant for
installation in an outdoor enclosure
/antenna hut OR mounted outdoors on
an antenna assembly at their specified
temperature ranges. They are designed
to be located “out in the elements”
(water, sleet, snow, etc.) but they are not
designed to be “submerged under”
water.
If an extended temperature range is
required, there is an Extended
Temperature option (Option W21; -
30˚C to +60˚C) available at an additional
cost. Contact Cross for quote.
4116-T21-310212 Manual, Rev. 0
Page 5
03/13/18