2.2 Rear Panel Input / Output Signals - Figure 2.2 shows the input and output connectors on the rear panel.
J1 - RF OUT
3.40 - 4.20 GHz
N-type female connector.
See Table 2.2 for other options.
EXT 10 MHZ
INPUT
J2
MONITOR
AND
CONTROL
5 4 3 2 1
9 8 7 6
J11 - MONITOR AND CONTROL
DB9 female connector.
See Table 2.1.
J1
J8
RF INPUT
J101
J2 - 10 MHz INPUT
10 MHz external reference input,
+3dBm, ±3 dB,
BNC female connector
AC - POWER IN
AC input for switching power supply.
100-240 ±10% VAC, 47-60 Hz.
J11
AC
GND
J101 - RF INPUT
5.8445 - 6.645 GHz
N-type female connector.
See Table 2.2 for other options.
J14
J14 - ETHERNET
CONNECTION (option W8)
RJ45 Ethernet Connector
10 MHZ REF
OUTPUT
OUTPUT
J8 - 10 MHz OUTPUT
10 MHz external reference output,
+3dBm, ±3 dB,
BNC female connector
FIGURE 2.2 3116-66T42 Rear Panel Inputs and Outputs
Table 2.3 Coonnectors/Impedancee
Table 2.3 Connectors/Impedancee
Pin
Function
1
Table 2.3 Connectors/Impedancee
2
Table 2.3 Connectors/Impedance
3
Table 2.3 Connectors/Impedance
4
Tx-
5
Table 2.3 Connectors/Impedance
6
Alarm Relay: Common
7
Alarm Relay: Normally Open
8
Not Used
9
Alarm Relay: Normally Closed
*Interface: DB-9 Female
Protocol: RS485, RS422, or RS232C (selectable),
9600 baud rate, no parity, 8 data bits, 1 start bit, 1 stop bit
3116-66T42 Manual, Rev.0
Page 9
09/07/17
Table 2.3 Coonnectors/Impedance
2.3 C
onnectors/Impedance
SS
50
Ω
SMA (RF)
TABLE 2.2 A
Available
TABLE 2.2 Available Options
W8
Ethernet; w/Web Browser
W18
Ethernet; w/WB & SNMP
W28
Ethernet; w/TCP/IP, Telnet
