1.3 Monitor & Control Interface
The following tables summarize the commands and status queries applicable to the
3116-66T42 Translator
.
*
PLEASE NOTE:
The two character {aa} prefix, shown in the table below, is present ONLY when RS485 is selected.
Table 2.0 Model 3116-66T42 M&C Commands
-2000
≤
xxxxx
≤
+2000
where:
{aaCOxxxxx}
Set Reference Offset
x = 2 for auto-select
x = 1 to select external reference
x = 0 to select internal reference
where:
{aaCEx}
Set External Reference
x = 0 to unmute the output
x = 1 to mute the output
where:
{aaCMx}
Set Mute
Range: -200 to -500 in 0.5 ±0.5 dB steps (e.g.,-220 = -22.0 dB)
xxxx = 4 characters
where:
{aaCGxxxx}
Set Gain
Description
Syntax
Command
Table 2.0: Model 3116-66T42 M&C Commands
continued on page 7...
3116-66T42 Manual, Rev.0
Page 6
09/07/17
