1.2 Technical Characteristics
Technical Characteristics continued on page 5...
2116-21#-1014 Manual
Page 4
03/18/21
±1.5 dB,
1014 ±50 MHz out
; ± 0.5 dB, 40 MHz BW;
Frequency Response
<-55 dBC for two carriers at Fc ± 2 MHz spacing, each at -5 dBm out
Intermodulation
<-50 dBm (0.2-0.95 and 1.07-1.80 GHz Out)
Spurious, Out of Band
Channel Characteristics
LO Characteristics
SIGNAL RELATED <-55 dBc in band, 0 dBm out;
SIGNAL INDEPENDANT < -60 dBm (1014 ± 50 MHz Out)
Spurious, Inband
± 0.01 ppm max. over temp internal reference; ext. reference input
Frequency Accuracy
Inverting
Frequency Sense
3 dBm ± 3 dB
10 MHz In/Out Level
3.128 GHz
LO Frequency
> 60 dB, minimum
Image Rejection
+0 dB ±1 dB
Gain @Fc
19 inch, 1RU Standard Chassis 1.7” high X 14.0” deep
Size
Other
100-240 ±10% VAC, 47-63 Hz, 25 watts maximum
Power
DB9, - NO or NC contact closure on Alarm
Alarm Connector
BNC (femal), 50/75
Ω
10 MHz Connectors
N-Type (female), 50
Ω
, BNC (female), 50
Ω
,
RF, L-Band Connector
-120
-100
-95
-90
-80
1MHz
100kHz
10kHz
1kHz
100 MHz
dBC/Hz
Phase Noise @ Frequency
Controls, Indicators
Red LED, External Contact Closure
PLL Alarm
Yellow LED; indicates ext. 10 MHz reference selected (rear panel DPDT switch)
External 10 MHz
Green LED
Power
TABLE 1.2
2116-21#-1014 Downconverter Specifications*
-20 to 0 dBm
Input Level Range
20 dB (maximum gain)
Noise Figure, max.
-10 dBm
Input 1dB Compression
2114 ± 50 MHz
Frequency
+10 dBm
Output 1 dB Compression
-20 to 0 dBm
Output Level Range
Output Characteristics (L-Band)
Input Characteristics (RF)
1014 ± 50 MHz
Frequency
50
Ω
/14 dB
Impedance / Return Loss
50
Ω
/14 dB
Impedance / Return Loss
*+10˚C to +40˚C; Specifications subject to change without notice.
