Cross Technologies 2016-75-213, Instruction Manual

Page: 5 / 19

1.2 Technical Characteristics
TABLE 1.0 2016-75-213 Downconverter Specifications*
Input Characteristics
Impedance/Return Loss 75 Ω /12 dB (see TABLE 2.2 for connector options)
Frequency 719 MHz ± 3 MHZ
Input Level -60 to -20 dBm
Output Characteristics
Impedance/Return Loss 75 Ω /12 dB (see Table 2.2 for connector options)
Frequency 201.143 or 213.143 ± 3 MHz
Level Range -30 to -20 dBm
Output 1 dB Compression -15 dBm
Channel Characteristics
Gain range (adjustable) 0.0 to +40 dB
Image Rejection <50 db, min.
Frquency Reponse 201.143 or 213.143 ± 3 MHz out; ± 0.5 dB
Spurious Response <-45 dBC, in band
Group Delay, max. 0.01 ns/MHz2 parabolic; 0.03 ns/MHz linear; 1 ns ripple
Frequency Sense Non-inverting
Synthesizer Characteristics
Frequency Accuracy ± 1.0 ppm max over temp (± 0.01 ppm option -H) internal reference
Frequency Step 1.0 MHz minimum
10 MHz In/Out Level 3 dBm, ± 3 dB, 75 ( option -E )
-110 -95 -80 -70 -70
1MHz 100kHz 10kHz 1kHz 10Hz
dBC/Hz
Phase Noise @ Freq
Controls, Indicators
Frequency/Gain Selection direct readout LCD; manual or remote
Power Green LED
Alarm Red LED
Remote Yellow LED; RS232C (RS485, option -Q ), 9600 baud
Other
RF, IF Connector Type F (female) (see TABLE 2.2 for other options)
IF Connector BNC (female) (see TABLE 2.2 for other options)
Ext 10 MHz Conn. (In/Out) BNC (female) ( option -E )
Alarm/Remote Connector DB9 - NO or NC contact closure on Alarm
Size 19 inch, 1RU standard chassis 1.75”high X 16.0” deep
Power 100-240 ±10% VAC, 47-63 Hz, 45 watts max
Options Available
E - External 10 MHz ref input & output Connectors/Impedance
H - High Stability Internal Ref (±0.01 ppm) B - 75 Ω BNC (RF), 75 Ω BNC (IF)
Q - RS485 Remote Interface C - 50 Ω BNC (RF), 75 Ω BNC (IF)
X - 125 kHz Frequency Steps D - 50 Ω BNC (RF), 50 Ω BNC (IF)
N - 50 Ω N-type (RF), 75 Ω BNC (IF)
M - 50 Ω N-type (RF), 50 Ω BNC (IF)
S - 50 Ω SMA (RF), 50 Ω BNC (IF)
*+10˚C to +40˚C; Specifications subject to change without notice.
2016-75-213, Rev. A Manual Page 4 4/16/09
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com