Cross Technologies 2016-05A, Instruction Manual

Page: 15 / 16

2.5.5 Alarm Indications
An alarm condition for will occur if any local oscillator phase lock loop (PLL) comes out of lock. The Mute
LED will light if you select Mute and the Remote LED will light when you select the Remote mode.
ON POWER UP
NORMAL DISPLAY
PUSHING MENU/EXECUTE SEQUENCE
REV 1.00
F = 1450 G = +10.0
F = 1450
SCROLL <>
SCROLL PUSH BUTTON
REMOTE OFF
EXT REF OFF
SCROLL <>
SCROLL PUSH BUTTON
PUSH BUTTON
Power Up
Normal Display
Menu 1 Frequency
Menu 2 Gain (00.0 to +50.0)
Menu 3 Set Unit to Remote
Operation
Menu 4 Select External 10 MHz
Reference (option E)
Menu 5 Select 10MHz Reference
Out (option E)
Menu 6 Set Remote Mode
(option Q)
Menu 7 Set RS-485 Address (option
Q)
Menu 8 View PCB temperature
(option T)
Menu 9 View LNB current
(option L)
Save? When “R” is selected or
when the end of the menus is
reached
G = +10.0
SCROLL <>
SCROLL PUSH BUTTON
SCROLL <>
SCROLL PUSH BUTTON
LNB DC = 0.36 A
SAVE SETTINGS? Y N
SCROLL <> PUSH BUTTON
R
R
R
R
R
REF OUT OFF
SCROLL <>
SCROLL PUSH BUTTON
R
RS 485 OFF
SCROLL <>
SCROLL PUSH BUTTON
R
ADDRESS = 00
SCROLL <>
SCROLL PUSH BUTTON
R
TEMP = 35 DEG R
SCROLL <> PUSH BUTTON
SCROLL <> PUSH BUTTON
FIGURE 2.5 Menu Display and Sequence
2016-05A Manual, Rev A Page 15 04/17/17