Cross Technologies 2015-24, Instruction Manual

Page: 16 / 18

2.5.5 Alarm Indications
An alarm condition for will occur if the local oscillator phase lock loop (PLL) comes out of lock. The Mute
LED will light if you select to mute the Tx Signal and the Remote LED will light when you select the Remote
mode.
ON POWER UP
NORMAL DISPLAY
PUSHING MENU/EXECUTE SEQUENCE
REV 1.00
F = 1450.000
G = +10.0
F = 1450
SCROLL <>
SCROLL PUSH BUTTON
REMOTE OFF
EXT REF OFF
UP MUTE OFF
SCROLL <>
SCROLL PUSH BUTTON
SCROLL <>
SCROLL PUSH BUTTON
SCROLL <>
SCROLL PUSH BUTTON
PUSH BUTTON
Power Up
Normal Display
Menu 1 Set Frequency
Menu 2 Input Level (Set from -40
to -10)
Menu 3 Gain (-10.0 to +30.0)
Menu 4 Mute TX Signal
Menu 5 Set Unit to Remote
Operation
Menu 6 Select Frequency Step
Size
Menu 7 Select External 10 MHz
Reference (option E)
Menu 8 Select 10MHz Reference
Out (option E)
Menu 9 Set Remote Mode
(option Q)
Menu 10 Set RS-485 Address
(option Q)
Menu 11 View SSPB current
(option V)
Save? When “R” is selected from
any above menu or at the end
UP INLVL = -20
G = +10.0
SCROLL <>
SCROLL PUSH BUTTON
SCROLL <>
SCROLL PUSH BUTTON
SSB DC = 1.86 A
SAVE SETTINGS?
SCROLL <> PUSH BUTTON
R
R
R
R
R
R
R
REF OUT OFF
SCROLL <>
SCROLL PUSH BUTTON
R
RS 485 OFF
SCROLL <>
SCROLL PUSH BUTTON
R
ADDRESS = 00
SCROLL <>
SCROLL PUSH BUTTON
R
SCROLL <> PUSH BUTTON
STEP = 1 KHZ
SCROLL <>
SCROLL PUSH BUTTON
R
Y N
FIGURE 2.5 Menu Display and Sequence
2015-24 Manual_Rev.G Page 16 05/28/13