Cross Technologies 2005-02P4, Instruction Manual

Page: 4 / 9

1.2 Technical Characteristics
TABLE 1.1 2005 Upconverter Specifications
Input Characteristics
Impedance 75
Ω
Return Loss 12 dB
Frequency 70 or 140 MHz center
Input Level -10 to -40 dBm
Input 1 dB comp / 3rd order 0 / +10 dBm (low gain), -20 / -10 dBm (high gain)
Output Characteristics
Impedance 75
Ω
Return Loss 8 dB
Frequency Band 950 -2050 MHz (-02)
950 -1450 MHz (-03)
Channel Characteristics
Gain (at 1200 MHz) -20 dB ±3 dB(low gain)
-5 dB ±3 dB(high gain)
Spurious Response NA; output not filtered
Frequency Response ±4 dB, 950 -2050 MHz; ±0.5 dB, any 10 MHz increment (-02)
±3 dB, 950 -1450 MHz; ±0.5 dB, any 10 MHz increment (-03)
Synthesizer Characteristics
Frequency Accuracy ± 25 kHz max
Frequency Step 1.0 MHz minimum
-80
10kHz
-100 -90
1MHz 100kHz
dBC/Hz
Phase Noise @ Freq
Controls
L-Band Frequency Selection BCD switches with direct readout
LO Selection SPDT slide switch
IF Frequency Selection SPDT slide switch
Indicators
DC Power Green LED
Alarm Red LED
Other
RF Connector F type (female)
IF Connector BNC (female)
Size, Bench Top 4.7” wide X 1.75” high X 6.5” deep
Size (option -R) 19-inch standard 1RU chassis 1.75”H x 7.0”D
Power, Standard (P4) 100-240 ±10% VAC, 47-63Hz (+15VDC unregulated, 600 ma.)
Wall Mount PS (Specify US, EUR, AUS, or UK)
Power Supply Option:
Power (option C) No power supply. Requires external 2000-01 power supply.
*+10˚C to +40˚C; 2000 meters max elevation; 80% max humidity; Pollution Degree 2; Specifications subject to change without notice.
2005-02/03 Manual, Rev. J Page 4 08/14/2019