12
16 - START̶
Press to start the dishwasher after you have selected a cycle and
function (if desired). And close the door within 4 seconds of pressing
START
.
The cycle indicator and the function indicator (if selected) turns on.
If you donʼt close the door within four seconds of pressing
START
, the
dishwasher pauses. Press
START
again to continue with the cycle.
To cancel a running cycle, open the door, then press and hold
START
for three seconds. The dishwasher will return to standby status. Once you close
the door , the dishwasher will show 1 minute countdown and begin draining.
To load more dishes or pause the dishwasher while itʼs already running, open
the door. A safety mechanism stops the cycle.
Caution
To avoid injury open the door slowly and carefully. There is a
possibility of hot steam from inside the dishwasher.
You can add more dishes before the main wash cycle has started. To determine
this, check the detergent dispenser in the door. If the detergent dispenser is still
closed, you can add more dishes. If it is open, you can add dishes to the
dishwasher if the dish quantity is small. If the quantity is large, restart the cycle.
17 - Rinse Aid
̶Turns on when you need to add rinse aid.
18 - Sanitized
̶Turns on when a sanitized cycle is finished. Turns off after
30 seconds when the door is opened.
19 - Control Lock
̶Turn on when the control lock function is activate.
Cycle process indicator
There are three lamps in the front door, beside the pocket handle or top right
corner of the door. the correspond lamps will lid when the dishwasher runs in
the following process. Turn off once the door opening at the end of washing
cycle.
WQP12-65M3
WQP12-65M4
Process
Wash
Dry
Cleaned
