40
Presser foot. . . . . . . . . . . . . . . without presser foot
Program selection . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Attaching the darning plate . . . . . . . . . . . . . . . . 1-4
Remove the presser foot holder (16)
(see page 10).
Thread tensions (see page 19): upper thread
looser than usual, under thread as usual.
If necessary, place a piece of cloth under the
worn out place.
1. Place the work under the needle and
lower the presser foot lever (23) so that
the thread tension will become effective.
By slowly manually sliding the fabric
backward and forward, proceed to sew
slowly.
Repeat this process until the worn out
place will closely be covered with parallel
stitches.
If necessary, the place can once again be
darned in the other direction, as you do it
when darning manually.
1
2
2. While darning, the material must be well
stretched. If the worn out space is large,
it is advisable to use an embroidery frame
(not included) for stretching your work.
Darning
Embroidery frame
