CROC TPS20, Product Manual, Page: 8 / 16

8 | CROC Trough Pump Systems ‘TPS20
TM
Product Manual’
TPS20
TM
PRODUCT MANUAL
Placement of TPS-20 Pump in Short Rectangular Troughs up to 2.5 Metres Long.
Short Rectangular Troughs up to 2.5 Metres
Place the pump at the float cover end of the trough, ensuring it does not interfere with the float valve
operation. The outlet tube and Y or T piece outlet should be approx. 25mm to 75mm above water level.
Screw the threaded cap on the threaded outlet of the Y piece to ensure only one outlet of the Y piece
is open. Direct the open outlet of the Y piece towards the centre of the trough, so the outlet sprays the
water to the end of trough, forming a wave like motion.
Placement of TPS20 Pump in Short Rectangular Troughs up to 2.5 Metres Long
Refer to our website croctroughpumps.com.au for examples of operational pump set ups
PUMP OUTLET TUBE TO BE 25mm TO
75mm ABOVE WATER LEVEL
PROTECTION MESH ABOVE PUMP
WATER LEVEL
CAP