A
C.R. LAURENCE Co., INC.
Visit us at
crlaurence.com
for international toll free information 8
opeRAtING INstRUCtIoNs
Read the
eNtIRe ImpoRtANt sAfety INfoRmAtIoN
section at the beginning
of this manual including all text under subheadings therein before set up or use of
this product.
to pReveNt seRIoUs INJURy fRom ACCIDeNtAL opeRAtIoN:
Squeeze the
release Trigger and unplug the tool from its electrical outlet before performing any
procedure in this section.
INSTALLING THE SAW BLADE
1. If there is an installed blade, remove it by opening
the Chuck and pulling the blade out. To open the
Chuck, rotate it counterclockwise and hold it in the
open position.
2. Release the Chuck to close it.
3. To install the new Saw Blade, rotate and hold the
Chuck counterclockwise while inserting the Saw
Blade and pushing it in to its deepest position.
4. Release the Chuck to close it.
5. Check that the Saw Blade is firmly locked in place
and that the teeth are pointed downward.
WARNING:
To prevent serious injury: Before plugging
in the Power Cord for each use, wearing work gloves,
pull on the Saw Blade to make sure it is securely
locked in the Chuck.
HANDLE ROTATION
1. For comfort and controlled cutting from any angle,
the Handle may be rotated up to 180˚ with five
position stops (0˚, 45˚, 90˚ to the left and 45˚ and
90˚ to the right)
2. Rotate the Handle, press the Rotation Switch and
turn the Handle to the desired position. Check to
make sure the Handle is locked into the chosen
position.
Rotation Switch
