C.R. LAURENCE CO., INC.
Visit us at
crlaurence.com
for international toll free information
ASR1 Mounting Instructions
2
1.
2.
3.
4.
5.
6.
7.
8.
9.
With a pencil and tape measure, mark
the wall above the center of tub edge
at the desired height for installation of
the curved Shower Rod. Be sure to
make each side at the same height.
With a pencil, mark the desired spots
where the holes will be made to attach
the brackets to mount on the wall.
Drill holes in the marked location for
the mounting screw (D) and insert the
drywall anchor (C). Note: If the screws
will be going directly into the wall
studs, wall anchors will not be
necessary
Fasten brackets to the wall with the
mounting screws provided.
With the bracket secured to the wall,
the installation of the Shower Rod is
next.
You will need to use two screws on
each side to lock the Shower Rod to
the bracket.
Insert one Shower Rod tube into the
mounting bracket and tighten it by
screwing in two screws through the
holes on each side. Repeat this step
for the other bracket once the bracket
has been mounted into the wall.
Slide the second Shower Rod tube
onto the first tube that has already
been mounted to the wall bracket. (as
in drawing #7).
Secure the second side of the Shower
Rod tube in place into the other wall
mounted bracket.
