CRL Metal Bond Diamond Drills
CRL
Metal Bond Diamond Drills can be used in portable machines and are especially suited for high production -equipment with
water coolant chucks such as double opposed drilling machines. Metal bond drills offer the greatest life of all type glass drills. The
quality of CRL Metal Bond Diamond Drills is the finest -available and have a 3/8" deep cutting matrix filled with -diamonds and
bronze bond that are more fragile than plated drills. Because of this they should always be used in true-- -running machines on flat
glass -surfaces. Use a wet -sharpening stone to expose fresh diamonds when drilling actions slows.
CRL Electro Formed Diamond Drills
CRL Electro Formed Diamond Drills are thin walled with 1/2" deep multi-layer of -diamonds and bonding matrix designed for high
speed, high production drilling.
The Fragile nature of this type of drill requires use in a precision machine such as our AMZ1.
Sharpening of these drills as required will keep up top speed production.
CRL Belgian Style Diamond Countersinks
These Belgian Style Diamond Countersinks are made with the metal bond diamond process. A groove in the head feeds water to the
countersink face. The 90° angle is perfect for putting a chamfer on holes in glass.
CRL
Diamond Spot Facers
• Custom Sizes Available
Designed for drilling flat -bottom holes in glass to a partial depth. Center Coolant feed is required. Belgian mount only. 100 grit plated
tool can be replated again when worn. Three popular sizes.
CRL Diamond Tool Coolant
• Maximize Diamond Tool Life
• Designed for Drilling & Cutting
• Non-Hazardous
• Concentrated, Mixes with water 50 to 1!
Mix CRL Diamond Tool Coolant with water to create an
excellent solution for drilling or cutting. The coolant lowers the
temperature in the contract zone, allowing the tool to retain its
diamond crystal longer.
CRL Diamond Tool Coolant is economical to use, because it
comes in a concentrated form and dilutes in 50 parts water to one
part coolant. Available in gallons, quarts and 8 ounce bottles.
CRL Sharpening Stones
• Use to Expose Fresh Diamonds
Achieve maximum life from your diamond drills by
using the correct sharpening stones. These highly
abrasive stones remove worn diamond and bond
contact, exposing fresh cutting crystals on the drill.
Use on all multilayer drills as needed. Saturate by
letting stone sit in bucket of water for 5 minutes
before use.