Floor Pump
Dated: 01.08.2011
Instruction Manual
Congratulations on your purchase of this high-quality Floor pump. For safety reasons we
request that you read through the instruction manual and the safety notes it contains as
carefully as possible and to save this, as it can always be helpful if you encounter any
problems with your air pump. The instruction manual is a set component of this product
and must be included if the product is passed on to any third party.
Storage instructions!
Please save the product information! The instruction manual is a set component of this
product and must be included if the product is passed on to any third party.
Intended use:
This Floor pump is suitable for inflating all conventional bicycle tyres.
Other uses or modifications to the product are considered non-inten-
ded usage and can lead to risk of injury and damages. The distributor
bears no liability for damages resulting from non-intended usage. The
product is not intended for commercial use.
Warnings:
You can inflate all bicycle tyres up to the pump’s indicated maximum
tyre pressure (max. 8 bar / 116 PSI) or to the tyre manufacturer’s indi-
cated maximum tyre pressure. This can usually be found on the tyre
wall. The indicated maximum values may not be exceeded at any time.
Defective or damaged air pumps may no longer be used due to risk of
injury. Defective Floor pumps must be properly disposed of. Repairs are
not possible.
Due to the high operating force and the risks associated with this, the
product is not suited for use by children or persons with physical and/
or mental disabilities. Please note that the pump plunger and pump
cylinder become very hot over longer periods of pumping due to the
friction between them. For this reason, you should only grasp the pump
on the pump handle after pumping in order to avoid burns.
Due to the risk of injury, a defective or damaged Floor pump may never
be used.
Package contents:
1 x floor pump
1 x metal adapter for balls,
2 x plastic adapters for air mattresses, inflatable toys, etc.
Technical data:
Type: Floor Pump
Service Centre Nr: 63785/12 / IAN Nr. 68643
Nominal pressure: 6 bar / 87 PSI
Nominal excess pressure: 8 bar / 116 PSI
Pressure hose length: 64,5 cm
Production date: 2012
Warranty: 3 years
Distributor:
Monz GmbH & Co. KG
Bruchhausenstr. 20 - 54290 Trier / Germany
Service address:
Internationales Service Center
Schönbornstr. 14 - 54295 Trier / Germany
Tel. Nr.: 0049 (0) 651 436 6452
E-Mail: [email protected]
www.internationales-service-center.de
Cleaning & care instructions!
- clean with a damp cloth
- do not immerse in water
- Regularly inspect the floor pump’s screw joints for secure attachment before use.
Maintenance:
The floor pump is maintenance-free.
Disposal:
The packaging is made of 100% environmentally-friendly materials which you can dispo-
se of via your local recycling points. Please obtain information about the disposal options
for the floor pump from your community or municipal government.
Operation of the floor pump:
GB
IE
Place the floor pump
on a level and stable
surface.
There must be no
kinks in the pump
hose.
During pumping,
please always position
yourself with both feet
on the foot plate of the
floor pump to ensure it
won’t fall over.
Operate the pump
handle in a smooth
and even manner
and not too quickly.
2
3
210 mm
148 mm
148 mm
