40
© 2021 All rights reserved. Data subject to change without notice.
LPT - Operation Manual
Rev. E | 2021.03
9.2 Calibration Adapter Clip “Cal Clip”
p/n:
CET-SGC
To calibrate an LPT with a factory installed splash guard (Option -S), attach the Cal Clip around the
splash guar
d. The small barb hose fi tting accommodates standard or Tefl on tubing of 1/8” (3.175
mm) ID and 3/16” (4.762 mm) ID. The Cal Clip
must be removed during normal operation
or
else the gas readings will not be accurate.
9.3 Metal Protective Guards
The metal protective guard (p/n:
SCS-8000-RSG
) is made of heavy gauge, galvanized metal and
helps protect against abrasive damage, theft and vandalism to the transmitters. The 16-gauge
galvanized steel has 13 mm (½ in) square openings in the front to allow gas and air to fl ow through
to the sensor. With only four slotted mounting holes, installation and removal for gas detector
servicing is easy. In applications where sticky gases are being monitored, such as Chlorine and
frequent wash-downs are required, the metal guard can be ordered with a splash cover (p/n:
SCS-
8000-WSG
). The splash cover is made of a material that allows the sticky gas to reach the sensor
without adhering to the vent opening, plus protects the sensor from water ingress.
