28
2.3
U
SER INTERFACE AREA
3
INSTALLATION
This paragraph deals with installation of the equipment.
Installation and
initial commissioning should be carried out by an electrician or professional installer in accordance
with the standards currently in force (for pleasure boats the applicable international standard is ISO13297).
The installer should familiarize
himself with this operating manual and inform users of the instructions for use and the
safety warnings set out in the manual.
3.1
R
EGULATOR OVERALL DIMENSIONS
Place the regulator vertically, connection downwards. Failure to respect this position may cause a decrease in available
power and a loss of IP level.
A clear area of 150mm is recommended all around the regulator for proper ventilation and opening of the regulator.
Never put anything on the regulator.
Can BUS
Programming
buttons
Output
fuses
Input
fuses
Remote
display
Temperature
probe
On/Off
