IGNITION SWITCH WIRING
5 OR 6* PIN HIGH-CURRENT CONNECTORS:
( *Some units may be shipped with a 5-pin connector and a separate spade connector for the White parking lamp wire or the unit
may have 6 pin for all the High-Current spades. There is no difference between the two.) See diagram for typical connections.
PIN 1: BROWN 14 GA. : STARTER OUTPUT (30A)
PIN 2: GRAY 14 GA. : IGNITION 2 / ACC (30A)
PIN 3: RED 14 GA. : BATTERY CONSTANT FUSED (30A)
PIN 4: RED 14 GA. : BATTERY CONSTANT FUSED (30A)
PIN 5: PINK 14 GA. : IGNITION 1 (30A)
PIN 6: WHITE 18 GA. : (+) PARKING LIGHTS (10A)
NOTE:
Heavy duty Ignition circuits (greater than 30 AMPS) require high-current relays. Do not use the outputs of the RS900 Series
II for High-Current systems or you will risk damaging the unit. Use Crimestopper Part #CS-403 relays for circuits up to 70 amps.
8
PARKING
LIGHTS
FUSE
RED
WHITE
30A
FUSE
RED
+10A MAX.
30A
+
-
BROWN
PINK
FUEL
ENGINE
BATTERY
PUMP
ECU
GRAY
+
STARTER
-
COIL
IGN 1
2nd IGN 1
OR
TRANSMISSION
2nd IGN 2
IGN 2
ECU
H/V/AC
Summary of Contents for RS-900ER.II
Page 9: ...7...
