background image

 

 

 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 

 

 

 

INSTALLATION INSTRUCTIONS: 

 
The

 

SV-5200.IR and SV-5200.IR.C are bar-type license plate cameras with a super wide 180° 

viewing angle and IR night vision.  They are easy to install with no drilling required, requiring 
minimal installation time. This uniquely designed product can be used for any passenger car, 
SUV and Van. It can also be used on many large Semi Trucks, School Buses, and Transit 
Buses

 

 
FEATURES: 

 

  Revolutionary design integrates a Color rear vision camera with your rear license plate 

  Enhance the look of your Car, SUV, Truck or Van. 

  The 180

°

  ultra wide-angle CMOS  color camera provides rear images in real time and 

eliminates the dangerous “blind-spot” directly behind your vehicle when backing. 

  Works well in day or night, on most vehicles. 

  Normal or Reverse Image (Selectable) 

  The plate cam easily connects with other SecurView monitor or aftermarket monitor that 

uses an RCA input 

  Available in black and chrome color 

  The PlateCam™ is designed for vehicles in which the license plate location is centered 

and above the level of the rear bumper.  The PlateCam™ may not perform well on 
vehicles with low or offset license plate positions. 

SV-5200.IR 

SV-5200.IR.C 

 License Plate Bar-Type 

Camera with Night 

Vision 

 

Summary of Contents for PlateCam SV-5200.IR

Page 1: ... look of your Car SUV Truck or Van The 180 ultra wide angle CMOS color camera provides rear images in real time and eliminates the dangerous blind spot directly behind your vehicle when backing Works well in day or night on most vehicles Normal or Reverse Image Selectable The plate cam easily connects with other SecurView monitor or aftermarket monitor that uses an RCA input Available in black and...

Page 2: ...ed to use the existing License Plate mounting equipment SIDE VIEW License Plate Camera Lens Mounting Surface Cable Factory License Plate Bolt NOTE License Plate Should Not Be Cut Or Trimmed CAMERA 1 The Camera has built in circuitry to reverse the image so objects on the right of vehicle appear on the right and objects on the left appear on the left when looking at a standard monitor See Reverse I...

Page 3: ...ing to drill the cable hole Use the rubber grommet to make a watertight seal for the cable where it passes into the vehicle 2 Choose a convenient place to run the camera cable up the left right or center of the vehicle As a rule of thumb try to avoid main factory harness looms that may contain high levels or RF noise or interference 3 You can connect the camera power at the rear of the vehicle beh...

Page 4: ...d all State or Federal Motor vehicle codes with regards to modifications of vehicle license plates The manufacturer of the PlateCam assumes no liability or responsibility whatsoever with regards modifications of the license plate www crimestopper com email crimestopper com Phone 800 998 6880 FAX 805 581 9500 2010 Crimestopper Security Products 7 15 2010 SPECIFICATIONS 1 4 Inch Color CMOS Sensor Vi...

Reviews: