COMPONENT MOUNTING
CONTROL MODULE:
Locate the module under dash as high as possible , away from moving parts. Driver’s
Side usually provides an easy location for the majority of the wiring connections.
WARNING:
Module isn’t water proof.
Don’t Install CS-5601 Module inside vehicle door
.
If the module gets water damaged, the vehicle windows could stop working.
WIRING
8
Position
Connector
Plug
– Small Wires
1 - GRAY:
Negative roll trigger for
Circuit #1 and #2.
Circuit
#
1
and #
2
are controlled by
LOOP 1 -
USE ONLY ONE
.
2 - GRAY/WHITE:
Positive roll trigger for
Circuit #1 and #2.
3 - BLACK: SYSTEM CHASSIS GROUND:
This wire must be connected to chassis metal of vehicle .
Scrape away any paint or dirt from the connection point to ensure a good connection.
4 - GREEN: (-) 300 milliamps
Negative output though out operation of any 4 circuits
5 - YELLOW: (+) 300 milliamps
Positive output through out operation of any 4 circuits
6 - BLUE:
Negative roll trigger for
Circuit #3 and #4.
Circuit
#
3
and #
4
are controlled by
LOOP 2 -
USE ONLY ONE
.
7 - BLUE/RED:
Positive roll trigger for
Circuit #3 and #4
.
8 - PINK:
Connect to an ignition wire that shows +12 Volts when the key in both “On” and “Start” positions.
This wire prevents the module from activating the windows while driving the vehicle.
3
