background image

 

27 

EXAMPLE: To Override The System With The Password Code 83, you would; 

1. Enter the vehicle and turn the ignition switch to 'ON’ position. (Alarm will sound.)  
2. Within 5 seconds, Press and Release the Program/Valet button 8 times  
3. Within 15 seconds of the last digit code enter (the 1

st

 code), turn the Ignition Switch “Off” and then “ON”. 

4. Within 15 seconds, Press and Release the Program/Valet button 3 times 
5. Turn the Ignition Switch to “Off” position. [4] Chirps form siren/horn, [3] flash from parking light to indicate the system was 

disarmed. 

 
 VALET MODE (System in Disarm or Valet mode) 

The  valet  button  allows  you  to  temporarily  bypass  all  alarm  function,  eliminating  the  need  to  hand  your  transmitter  to 
parking attendants or garage mechanics. When the system is in valet mode, all alarm function and remote start functions 
are bypassed, however the remote panic feature and remote door locks will remain operational. To use the valet mode, the 
system must be disarmed either by using you remote transmitter, or by operating the Manual override sequence.  

Enter Valet Mode: 

1. From the disarmed condition, turn the ignition to “ON” position. 
2. Push and hold valet button for 2 seconds until the LED turns on. The LED wills remain on as long as the system is in 
'valet mode'. 

Exit Valet Mode: 

1. Return to normal operation, turn ignition 'on'. 
 
2. Push and hold program/valet button for 2 seconds, The LED wills turn off indicate the system are exiting the valet mode. 

  

THE ACTION OF THE 2-WAY LED REMOTE CONTROL TRANSCEIVER

 

 

LED

 

LED REMOTE SOUND

 

Enter The Valet Mode 

Z

 LED turns on for 1.5 seconds  Two beeps 

Exit The Valet Mode 

 

Three beeps  

Remote Door Lock 

Z

 LED turns on for 1.5 seconds  1 beeps 

Remote Door Unlock  

Z

 LED turns on for 1.5 seconds  2 beeps 

 
CAR LOCATOR 

 

Press 

 

button to active car locator function. The siren and horn will chirp 6 times. The parking light will flash 12 times, for 

you to easily locate your car. 

 
PANIC FUNCTION  

The transmitter can be used as a remote panic switch to manually trigger the alarm in case emergency.  

Summary of Contents for CS-2205

































Reviews: