background image

OPERATING INSTRUCTIONS 

 

IGNITION-CONTROLLED DOORLOCKS 

The doors will automatically lock when the ignition is turned on and will unlock when the ignition is turned off.  
This feature can be programmed on, off, or to lock the doors only.  

 Doors will not lock if they are open to 

prevent locking the keys in. 

 

ACTIVE RE-ARMING (FAIL-SAFE PROTECTION) 

Active Re-arming means that the system will re-arm itself 30 seconds after disarmed with the transmitter if a 
door has not yet been opened.  This is handy if the vehicle is accidentally disarmed (via the transmitter in your 
pocket) without you knowing it.  This feature can also be turned off in programming option (4).If programmed 
for Passive Chirp Countdown, the unit will emit a chirp every 2 seconds until the system Active Re-arms. 

 

2

nd

 AUX. OUTPUT (REMOTE AUX. OUTPUT 2) 

To activate the Second auxiliary output press Button #1 (Lock) and hold for more than (2) seconds.  This 
output can be used to control optional add-on accessories such as Remote Engine Start Modules, Window 
Roll up/down modules, etc. 

 

ARM/DISARM WITH IGNITION ON (PROGRAM OPTION #15) 

This feature allows the system to be armed or disarmed while the ignition is in the ON position or vehicle is 
running.  The feature is disabled by default and should not be used under normal operating conditions.  In 
some rare instances where an add-on remote start module is used, this option can be enabled to allow the 
CS-2000 alarm to be armed or disarmed when the vehicle is remote started (Ignition ON). 

 
 
 

2 VEHICLE OPERATION 

 

2 VEHICLE CONTROL 

Your remote control can be programmed to Arm/Disarm a second vehicle with an identical Crimestopper CS-
2001FC Series II system installed. Follow the transmitter programming steps on the second vehicle.  Instead 
of pressing the #1 Lock at step 3, press Button #4 (Panic) on YOUR existing remote.  Your remote will now 
have arm/disarm control of the second vehicle with a quick press and release of your Button #4 (Panic).  The 
second car will learn your remote’s panic button for Arm/Disarm. 

 

NOTES: When both vehicles are present, don’t press the Panic button for too long or YOUR alarm 
system may trip.  You can only arm & disarm the second vehicle.  You cannot control any special 
features or Aux functions on the second car. 

 
 
 
 

Summary of Contents for CS-2001.FC.II





















Reviews: