background image

Page 21

• Repeat this 

Step 6

 for each additional feature until all features

are programmed.

 #1

SecureCode Programming

1 Press   (n/a)

 #2

30 / 60 Second Activated Alarm Cycle              30 Seconds   (U)

 #3

3 / 45 Second Arming Delay

              3 Seconds   (L)

 #4

Last Door Arming

OFF   (U)

 #5

Automatic Rearming

OFF   (U)

 #6

Auxiliary Output #2 Also Disarms System

 ON   (L)

 #7

Parking Light Illumination Upon Disarm

 ON   (L)

 #8

Doors Lock At Ignition “On”

 ON   (L)

 #9

Doors Unlock At Ignition OFF

 ON   (L)

#10

Not used on this model

#11

Open Door Bypass To Features 8, 9, 10

 ON   (L)

#12

Doors Lock With Last Door Arming

OFF   (U)

#13

Doors Lock With Automatic Rearming

OFF   (U)

#14

Ignition-Activated Vehicle Recovery

                OFF   (U)

#15

Door-Activated Vehicle Recovery

OFF   (U)

#16

Transmitter-Activated Vehicle Recovery

OFF   (U)

#17

Chirp Confirmation

 ON   (L)

#18

Steady Siren or Pulsed Horn Output                 Steady Siren   (U)

#19

Soft or Loud Horn Confirmation Chirps            “Medium Loud”   (:)

#20

1 or 2 Button Arming / Disarming

              2 Button   (U)

#21

Double Unlock Pulse

OFF   (U)

#22

Total Closure Lock Output

OFF   (U)

Step 7

Turn the vehicles’s ignition on or allow 10 seconds to pass without
performing any programming actions.
• The siren will sound briefly and the Status Light will go out to

confirm that the system has exited Programing Mode.

 #

FEATURE

             DEFAULT

The pages following explain each of the programmable features in detail,

and below is a convenient feature programming checklist, which greatly
simplifies the feature programming process.

The Remote Panic feature is designed for situations in which the user feels
threatened and/or in need of attracting attention.
• Remote Panic allows you to activate the siren and flashing lights from

the transmitter, with the enhanced choice of having the doors lock, or
unlock when doing so.

• Remote Panic can be activated anytime, whether the vehicle’s ignition is

turned on or off, and has a 30 second duration (60 seconds is optional)
unless it is deactivated earlier by using the transmitter.

• At the end of the Remote Panic cycle the system will reset, enter the

armed state, and lock the doors (even if it was originally activated with
the Upper Right “Unlock” Button).

Page 12

OTHER TRANSMITTER OPERATIONS

The previous sections have described only the most basic everyday opera-
tions of your Crime Guard system.  The transmitter is also capable of sev-
eral other optional functions.

The transmitter can also silently arm or disarm the system.  Pressing the

Lower Left Button twice simply reverses, or “toggles” the armed or dis-
armed condition of the system, without the normal confirmation chirps.

An Auxiliary Channel #2 is available for optional uses (consider that

the transmitter operates on the first channel to arm and disarm the system).
Auxiliary Channel #2 is also capable of disarming the system, also unlock-
ing the doors; thus it is ideally suited for remote trunk release.

THE DOORS WILL LOCK IF
ARMING, UNLOCK IF DISARMING

     

To Silently Arm or Disarm the System:

THE PARKING LIGHTS

WILL FLASH ONCE IF

ARMING, TWICE IF

DISARMING

Silent Arming and Silent Disarming are both operated by double-pressing the same transmitter button.

 Press

 2 X

THE SIREN
WILL NOT
CHIRP

Press & Release the Lower Left Button (   )  Twice

••

Summary of Contents for Crime Guard 328i4

















Reviews: