3
© 2020 HALFEN · INST_WDK 11/15 · www.halfen.com
HALFEN WDK
Assembly Instructions
Deutsch
English
3. Align the façade panel and drill the required hole
• Align the façade panel.
•
Drilling:
Drill a bore hole through the
threaded tube
into the concrete.
Drill diameter 12 mm
Avoid damaging the plastic parts!
Clamp a square piece of timber between
the façade panel and the concrete.
4. Installing of the mortar capsule
and the anchor rod
• Clean the bore hole and insert the mortar capsule
( → see also next page: „Cleaning“)
Anchor bolt M10 thread (stainless steel A4)
Mortar capsule
• Drive in anchor rod
using a hammer
drill with the provided setting tool.
Minimum edge distances [mm]
Façade panel
80
Support element
45
≥ 120
90
b
Observe the curing period!
( → see also table "Processing and curing periods"
on the next page)
For further information on step 4:
→
see next page
i
