FieldBus Input/Output System
■
EtherNet
/IP Network Adapter
■
PROFIBUS Network Adapter
■
Digital Input / Output
■
Analog Input / Output
■
Special Module
Quick Guide
FnIO S-series
NA-9188
1. NA-9188 Specification
* Specifications and designs could be changed without advance Notice.
Class 2, adjacent to voltage rating (30Vmax.)
ITEM
SPECIFICATION
ITEM
SPECIFICATION
Ambient Temp.
-20℃~55℃ / -40℃~85℃
Network Type
EtherNet/IP, BOOTP
Relative Humidity
5% ~ 90% without condensation
Cable
EtherNet Cable
Durable-vib./impact
IEC68-2-6(2G) / 10G
Cable Length(m)
Up to 100m from Ethernet Hub
EMC/ESD
EN50082 / EN50081
Comm. Sp(Kbps)
10/100Mbps
Mount Position
On the left of FnIO-S series
Expansion No.
Max. 32 module
Atmosphere
Not so dusty without corrosive gas
Max. node
Limited by Ethernet Specification
Field Supp.Volt.
Class 2, 24VDC
24VDC (11VDC ~ 28.8VDC)
Max. Digital I/O
Input : 2016points/Output :
2016points
Field Supp. Cur.
Max. 10A
Max. Analog I/O
Input : 126Ch / Output : 126Ch
FnBus Sup. Cur
Max. 1.5A@5Vdc
Max. Byte size
Input : 252Bytes / Output : 252Bytes
Isolation
System power to internal logic :
Non-isolation
System power to I/O driver :
Isolation
Operating Mode
Ethernet/IP, BOOTP
Size
45mm
×
99mm
×
70mm
IP Address Setting
BOOTP
Weight
150g
Power Dissipation
60mA typical @24Vdc
Certification
UL / cUL / CE / FCC / RoHS(EU,
China)
Cautions for your Safety
Do not assemble the products and wire with power applied to the system. Else it may cause an electric arc, which can result into unexpected
and potentially dangerous action by field devices. Arching is explosion risk in hazardous locations. Be sure that the area is non-hazardous or
remove system power appropriately before assembling or wiring the modules.
Do not touch any terminal blocks or IO modules when system is running. Else it may cause the unit to an electric shock or malfunction.
Keep away from the strange metallic materials not related to the unit and wiring works should be controlled by the electric expert engineer.
Else it may cause the unit to a fire, electric shock or malfunction.
If you don’t follow the directions, it could cause a personal injury, damage to the equipment or explosion
If you disobey the instructions, there may be possibility of personal injury, damage to equipment or
explosion. Please follow below Instructions.
Check the rated voltage and terminal array before wiring. Avoid the circumstances over 55
℃
of temperature. Avoid placing it directly in the
sunlight.
Avoid the place under circumstances over 85% of humidity.
Do not place Modules near by the inflammable material. Else it may cause a fire.
Do not permit any vibration approaching it directly.
Go through module specification carefully, ensure inputs, output connections are made with the specifications. Use standard cables for wiring.
Use Product under pollution degree 2 environment.
Before using the unit
*We appreciate you for purchasing CREVIS Products. To use the units more effectively, please read this quick guide and refer to
the respective user manual for further details.
Warning
!
Caution!
* Power Isolators must be used according to the usage of 5VDC/24VDC/48VDC or AC Voltage modules
