4. 모듈의 부분별 명칭과 기능
3
4
5
상태 표시 LED 창
(내용설명 참조)
EtherNet 연결 커넥터
시리얼 통신용 커넥터 (제조회사 Update용)
Din rail 고정용 손잡이
*1
상태 표시 LED 창 설명
2
케이블 커넥터용(장/탈착식 Terminal Block)
6
MAC ID
Item
LED is:
State
To indicate:
MOD :
Module
Status LED
Off
No Power
No power is supplied to the unit.
Green
Device Operational
The unit is operating in normal condition.
Flashing Green
Device in Standby
The device needs commissioning due to configuration
missing, incomplete or incorrect.
Flashing Red
Minor Fault
Recoverable Fault
- EEPROM sum check error.
Red
Unrecoverable Fault
The device has an unrecoverable fault.
- Memory error or CPU watchdog error.
NET :
Network
Status LED
Off
Not Powered
No IP Address
Module is not powered.
Does not have an IP address
Flashing Green
No Connections
Module has obtained an IP address, but has no
Established connections.
Green
CIP Connections
Module has an IP address and at least one established
connections.
Flashing Red
Connection Time-out
One or more of the connections in which the module is
The target has time out.
Red
Duplicate IP Address
Module has detected that its IP address is already in
use.
Configure the module with a unique IP address.
LINK :
Link/Active
Status LED
Off
Not Powered
Physical network not
ready
May not be powered
Green
Link Operational
Physical Network communication ready
Flashing Green
Act Operational
some data communication on the base Ethernet 802.3
I/O :
Expansion
Module
Status LED
Off
Not Powered
No Expansion Module
Device has no expansion module or may not be
powered
Flashing Green
FnBus On-line,
Do not Exchanging I/O
FnBus is normal but does not exchanging I/O data
(Passed the expansion module configuration).
Green
FnBus Connection,
Run Exchanging IO
Exchanging I/O data
Flashing Red
FnBus connection fault
during exchanging IO
One or more expansion module occurred in fault state.
- Changed expansion module configuration.
- FnBus communication failure.
Red
Expansion
Configuration
Failed
Failed to initialize expansion module
- Detected invalid expansion module ID.
- Overflowed Input/Output Size
- Too many expansion module
- Initial protocol failure
- Mismatch vendor code between adapter and
expansion module.
Field
Power
Status LED
Off
Not Supplied Field
Power
Not supplied 24Vdc field power
Green
Supplied Field Power
Supplied 24Vdc field power
