Crestron
TSW-730-MSMK
Multi-Surface Mount Kit for TSW-730
Installation Guide – DOC. 7415A
Multi-Surface Mount Kit for TSW-730: TSW-730-MSMK
•
7
NOTE:
When raceway is run to the bottom of the touch screen, the plastic
cover must be placed in the top of the plastic enclosure. When raceway is
run to the top of the touch screen, the plastic cover must be placed in the
bottom of the plastic enclosure.
10.
Attach the RJ-45 connector of the network wiring to the touch screen and
then install the touch screen by carefully pressing it into place. While
snapping the unit into place, pull the network wiring to remove slack. Refer
to the following illustration.
NOTE:
Use care when pulling plenum rated cable through the bottom of
the plastic enclosure, the rigidity of the cable causes slight resistance.
Touch Screen Mounting Using Glass Mounting Plate (Exploded View)
Glass Mounting Plate
(4516855)
Glass
Plastic Cover
(2024491 or 2024492)
Plastic Enclosure
(2033441 or 2033442)
Nut (4) #04-40 Hex
(2004878)
Touch Screen
(Sold Separately)
11.
Secure the touch screen to the plastic enclosure with Phillips head screws.
Alternatively, security Torx screws can be installed using a Torx
screwdriver bit (both included with touch screen), as shown in the following
illustration.
