Crestron
TSW-730-MSMK
Multi-Surface Mount Kit for TSW-730
Installation Guide – DOC. 7415A
Multi-Surface Mount Kit for TSW-730: TSW-730-MSMK
•
9
Apply Label to Back of Glass
Glass
Label
(4517696 or 4517697)
Angle Mounting
To install the angle mounting bracket, complete steps 1-7 of the “Flat Mounting”
procedure which starts on page 5. Continue with this procedure to assemble the
angle mounting bracket with the glass mounting plate.
1.
Using a 1/4” hex driver, install the angle mounting bracket (2033272 or
2033273) onto the glass mounting plate with the four included hex nuts
(2004878). Refer to the following illustration.
NOTE:
Angle mounting bracket may be oriented to tilt the touch screen 20
degrees up or down, depending on the application.
Attach Angle Mounting Bracket
Glass Mounting Plate
(4516855)
Glass
Angle Mounting Bracket
(2033272 or 2033273)
Nut (4) #04-40 Hex
(2004878)
