Crestron
TST-600-DS
TableTop Docking Station for TST-600
Installation Guide – DOC. 7433A
TableTop Docking Station for TST-600: TST-600-DS
•
5
Setup
Hardware Hookup
The only connection to the TST-600-DS is via the fixed cable, which is connected to
the
TO PANEL
port on the (included) TST-600-IMCW Interface Module.
When connecting the TST-600-DS, consider the following:
•
Use Crestron power supplies for Crestron equipment.
•
The included cable cannot be extended.
Hardware Connection for the TST-600-DS
To
TO PANEL
Connector on
TST-600-IMCW
NOTE:
The length of the connecting cable on the TST-600-DS is
9 feet (2.75
meters). The length of the cable has been shortened for illustrative purposes in the
diagram above.
NOTE:
The included cable mount ferrite bead, FBTH-2 (2033216) should be placed
on the cable near the connector end.
Recommended Cleaning
The TST-600-DS comes in a soft microfiber bag to protect it during shipping. This
can be used to clean the docking station.
