Video Card for TPS/Lectern Panel
Crestron
TPS-VIDL-1/TPS-VIDL-2
Connector Specifications of the TPS-VIDL-1/VIDL-2 (continued)
PORT TYPE
SIGNAL(S)
Y+
6-pin connector, 3.5 mm
S-Video luminance input or
composite input #1
Y-
6-pin connector, 3.5 mm
S-Video luminance return
or composite return #1
Y S
6-pin connector, 3.5 mm
S-Video luminance shield
(Balanced Video only)
C
BNC S-video
chrominance
or
composite input #2
COMP / Y
BNC
S-Video luminance or
composite input #1
Physical Description
The TPS-VIDL-1 and TPS-VIDL-2 card, shown in the following
diagrams, is a printed circuit board (PCB) that is designed for installation
into a dedicated expansion slot on the touchpanel motherboard. The card
contains a 60-pin connector that attaches directly to the motherboard and
is secured with four mounting screws (supplied with each model of the
video card). Video access is through two BNC connectors or a 6-pin
mini-phoenix connector that are permanently attached to the
TPS-VIDL card. The connectors (individually labeled in the
NTSC/PAL
INPUT
section of the touchpanel) are accessible from the connector
panel at the rear of the touchpanel case. Refer to the following diagrams
for physical dimensions.
TPS-VIDL-1/VIDL-2 VIDEO CARD (TPS-VIDL-2 Shown)
4
•
Video Card for TPS/Lectern Panel: TPS-VIDL-1/TPS-VIDL-2
Operations & Installation Guide - DOC. 6070
