Crestron
TPS-VIDL-1/TPS-VIDL-2
Video Card for TPS/Lectern Panel
2. Select
the
Video
button from the SETUP MENU to set
preferences for the video source. If a TPS-VIDL-2 is installed,
buttons labeled “Video 1” and “Video 2” will be displayed
instead of the single Video button. Select the appropriate
“Video” button to set preference for the video source.
Video Setup
3. The twisted-pair and BNC inputs can be configured to auto-
detect the signal type (S-Video or Composite) or can be set to a
specific signal type. Select the appropriate signal type.
NOTE:
When configuring the TPS-VIDL-2, the Video 1 signal type can
be automatically detected as long as one signal is sent to the touchpanel.
NOTE:
Up to four composite video feeds can be physically connected to
a TPS-VIDL-2 (two BNC feeds and two twisted-pair feeds). However,
only two composite video channels can be selected for viewing. Specify
the connections to use by selecting TP composite, TP S-Video, BNC
Composite, or BNC S-Video for each channel.
NOTE:
A solid blue screen is displayed in the video window if a video
signal is not detected or is very weak. Verify that the video source is
functioning and properly connected. If the source is properly connected
and functioning, a distribution amplifier may need to be used.
Operations & Installation Guide - DOC. 6070
Video Card for TPS/Lectern Panel: TPS-VIDL-1/TPS-VIDL-2
•
13
