Crestron
TPS-VIDL-1/TPS-VIDL-2
Video Card for TPS/Lectern Panel
Install TPS-VIDL-1/VIDL-2
7. Press the TPS-VIDL-1/VIDL-2 until the connector pins are
fully seated.
DO NOT
force pins into connector. Make sure
that the mounted screws align with the mounting posts of the
motherboard.
8. Tighten the card mounting screws to
finger-tight
.
CAUTION:
The TPS-VIDL-2/VIDL-2 connectors may have to be
aligned slightly to fit through the openings in the rear cover. Align the
connectors of this card (or any other optional card that is installed)
carefully
to prevent damage to the card, cover, or touchpanel.
9. As shown in the following diagram, install the touchpanel rear
cover by sliding it over the TPS-VIDL-1/VIDL-2 connectors.
Operations & Installation Guide - DOC. 6070
Video Card for TPS/Lectern Panel: TPS-VIDL-1/TPS-VIDL-2
•
9
