Ethernet Card for TPS/Lectern Panel
Crestron
TPS-ENETL
C2ENET-2 Device, Slot 8
Drag the appropriate Ethernet TPS touchpanel (for example, the TPS-
6000 w/TPS-ENET) from the
Touchpanels
folder and drop it on Slot 8 in
System Views
. The lower pane shows the touchpanel in IP-ID 03 (refer to
graphic on next page).
TPS 6000 w/TPS-ENET
NOTE
: SIMPL Windows automatically changes the IP ID values of a
device added to a program if a duplicate device or a device with the same
default IP ID already exists in the program. Always ensure that the
network device IP IDs set via Viewport match the ones in your SIMPL
Windows program.
NOTE:
For operation of a touchpanel that contains the TPS-ENETL,
refer to the “IP Table Setup” section of the latest revision of the Crestron
e-Control Reference Guide (Doc. 6052). The latest version can be
obtained from the Downloads | Product Manuals section of Crestron’s
website (
.
22
•
Ethernet Card for TPS/Lectern Panel: TPS-ENETL
Operations & Installation Guide - DOC. 6013