Wall Mount Docking Station for TPS-6X
Crestron
TPS-6X-DSW
Connectors, Controls & Indicators
#
CONNECTORS
1
,
CONTROLS &
INDICATORS
DESCRIPTION
1
TOUCHPANEL
CONNECTOR
(1) 10-pin connector for attaching touchpanel
2
LATCH RELEASE
Manual latch release
3 OPEN (1) Miniature pushbutton, accessible when
touchpanel is not docked, releases the
docking mechanism to allow touchpanel to
be docked
4
NET
(1) 4-pin 3.5 mm detachable terminal block;
Cresnet slave port, connects to Cresnet
control network
24
: Power (24 Volts DC)
Y
: Data
Z
: Data
G
: Ground
5
VID IN (UNBL)
2
S V
(1) 2-pin 3.5 mm detachable terminal block;
Unbalanced composite video input;
Input impedance: 75
Ω
nominal;
Input level: 1 V
p-p
nominal, 1.5 V
p-p
maximum;
Maximum DC offset: ±2 Volts;
Connects to any conventional coax video
source
6
VID IN (BAL)
2
S
-
+
(1) 3-pin 3.5 mm detachable terminal block;
Balanced composite video input;
Input impedance: 100
Ω
nominal;
Input level: 1 V
p-p
nominal, 1.5 V
p-p
maximum;
Maximum DC offset: ±2 Volts;
Connects to any Crestron CH CAT5 Video
Out port via CresCAT
®
cable
7
LAN
3
Pin 1
(1) 8-wire RJ-45 female;
10 BASE-T/100BASE-TX Ethernet Port
PIN
SIGNAL
PIN
SIGNAL
1
TX +
5
N/C
2
TX -
6
RC -
3
RC+
7
N/C
4
N/C
8
N/C
1. Interface connectors for
NET
,
VID IN (BAL)
, and
VID IN (UNBL)
ports are provided with the unit.
2. Balanced and unbalanced video inputs are mutually exclusive.
3. To determine which is pin 1 on the cable, hold the cable so that the end of the eight pin modular jack
is facing away from you, with the clip down and copper side up. Pin 1 is on the far left.
6
•
Wall Mount Docking Station for TPS-6X: TPS-6X-DSW
Operations & Installation Guide – DOC. 6708A
