background image

 CRESTRON  

Leading Specifications of the STX Touchpanels (Continued) 

SPECIFICATION

DETAILS

View Screen Resolution
          STX-1600C

320 x 240 pixels

          STX-3000 & STX-3500C

640 x 480 pixels

View Screen Display
          STX-1600C

Passive Matrix Color LCD

          STX-3000

Passive Matrix LCD

          STX-3500C

Active Matrix Color LCD

View Screen Illumination

Edgelit Fluorescent

View Screen Touch Screen

Resistive Membrane

 

As of the date of manufacture, the Series STX touchpanels have been tested and 
found to comply with specifications for CE marking. 

 

NOTE:

  Equipment has been tested and found to comply with the limits for a Class 

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential 
installation. The equipment generates, uses and can radiate radio frequency energy 
and, if not installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures: 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver.  

 

Connect the equipment into an outlet on a circuit different from that to which 
the receiver is connected.  

 

Consult the dealer or an experienced radio/TV technician for help.  

Setup 

WARNING:

  To avoid shock hazard and possible damage to the unit, do not use 

touchpanel in rain or expose it to unnecessary moisture.  

Recommended Touchpanel Cleaning 

Keep the surface of the touchscreen free of dirt, dust, or other materials that could 
degrade optical properties. Long term contact with abrasive materials can scratch the 
surface which may detrimentally affect image quality. 

Operations Guide - DOC. 5716A 

Series STX Touchpanels  

  7 

Summary of Contents for STX-1600C





































Reviews: