Crestron
ST-IO
Input/Output Module
Hookup Connections for ST-IO
- CONTACT CLOSURES
- SOLID STATE CLOSURES
- LIGHTING SYSTEMS
From Device Outputs
8
RELAY OUTPUT
7
6
TO
CONTROLLABLE
DEVICES
DAISY CHAIN
TO EXPAND
DIGITAL IN
2
CRESTRON ELECTRONICS INC. N.J. 07626
EXTERNAL
POWER PACK
(500 mA for ST-IO)
(1000 mA for STI-IO)
1
NET
.5A
12VDC
NET
5
3
4
2
G
1
4
3
NOTE:
Use ST-CNB (Sold Separately) to
connect ST-IO to Cresnet System.
Cresnet System
NET
G
24
Z
Y
Programming Software
Have a comment about
Crestron Software?
Direct software related suggestions
and/or complaints to Crestron via
e-mail (
).
Do not forward any quiries to this
address. Instead refer to “Further
Inquiries” on page 17 for
assistance.
Earliest Version Software Requirements for the PC
NOTE:
Crestron recommends that you use the latest software to take advantage of
the most recently released features. The latest software is available from the
Downloads | Software Updates section of the Crestron website (
).
The following are the earliest useable software version requirements for the PC:
•
SIMPL Windows, any version. Requires SIMPL+ Cross Compiler version
1.1.
•
Crestron Database version 16.0 or later. Required by SIMPL Windows.
•
Crestron Viewport version 3.35 or later.
Programming with SIMPL Windows
NOTE
: The following assumes that the reader has knowledge of SIMPL Windows.
If not, refer to the extensive help information provided with the software.
Operations Guide - DOC. 5675A
Input/Output Module: ST-IO
•
9
Summary of Contents for ST-IO
Page 1: ...Crestron ST IO Input Output Module Operations Guide ...
Page 4: ......
