CRESTRON
Operations Guide - DOC. 5737
Relay Controller: SP-RY
••
3
Setup
SP-RY with SmartPresenter
™
Connect the 3.5 mm, Serial Data Cable (supplied) to the input port on the SP-RY.
Connect the other end of the cable to one of the outputs on the SP-1. The device
cable should be connected to the appropriate devices.
To locate the Q-Code for the Relay Controller, refer to the latest revision of the
SmartPresenter –
Quick Guide
(DOC. 5742).
NOTE:
An external power supply is not necessary when using the SP-RY with the
SmartPresenter system.
Connect SP-RY to SP-1 and Devices.
To Devices
Serial Data Cable
Serial Data Cable
