Crestron
MPC-M10/20/25
Media Presentation Controller
Attach the Front Panel (MPC-M25 Shown)
Screws (4) 04-40 x 1/2"
(2021395)
Hardware Hookup
Connect the Device
Make the necessary connections as called out in the illustration that follows this
paragraph. Refer to “Network Wiring” on page 15 before attaching the 4-position
terminal block connector. Apply power after all connections have been made.
When making connections to the MPC-M10/20/25, note the following:
•
Use Crestron power supplies for Crestron equipment.
•
The included cable cannot be extended.
NOTE:
When connecting the included power supply to the
NET
connector on the
unit, make sure the lead with the white stripes goes to the terminal marked
24
. The
other lead goes to the terminal marked
G
.
Operations & Installation Guide – DOC. 6701C
Media Presentation Controller: MPC-M10/20/25
•
19
