Crestron
MPC-M10/20/25
Media Presentation Controller
Attach the Mounting Plate
Mounting Plate
(4506280)
Screws (4) 06-32 x 3/4"
(2009211)
Ground Wire
3. The ground wire from the mounting plate must be attached to an earth
ground.
NOTE:
Ensure the unit is properly grounded.
4. Attach cables to the rear of the MPC-M10/20/25.
5. Use the two included 04-40 x 1/4” screws to attach the MPC-M10/20/25 to
the mounting plate.
CAUTION:
Excess wire that is pinched between the MPC-M10/20/25 and the
electrical box could short out. Make sure that all excess wire is completely
inside the electrical box and not between the box and the MPC-M10/20/25.
Operations & Installation Guide – DOC. 6701C
Media Presentation Controller: MPC-M10/20/25
•
17
