Crestron
MMK-V12 & WMKM-V12
Mud Mount Kits
3. Use the second adjustment plate and repeat steps 1 and 2 using the lower
two PMK-V12 (or BB-V12) pins.
NOTE:
When installing into the PMK-V12, verify that the 18 AWG bus
wire securing the cables for the touchpanel remains attached.
4. Insert the symmetrical mud ring plate into the opening, as shown in the
illustration below.
Insert and Secure Mud Ring Plate into PMK-V12 (or BB-V12)
Drywall
Stud
PMK-V12
(not included)
Mud Ring
(2025263)
Drywall Screws (not included)
Screw length should not exceed
drywall thickness by more
than 1/2" (13 mm).
Flange
Installation Guide – DOC. 6892A
Mud Mount Kits: MMK-V12 & WMKM-V12
•
7
