Crestron
ML-500
Mini LCD RF Wireless Handheld Remote
COM port listing (as shown in the following diagram). Click the correct
COM port to automatically begin the file transfer.
“ML-500 Transfer” Window
Once the upload begins, the upload progress will be displayed in the “Status” section
of the window. Upon completion, “Success” will be displayed in the “Status” area.
Upload via Crestron Viewport
NOTE:
The Crestron Viewport is available as a pull-down command from SIMPL
Windows and VT Pro-e (
Tools | Viewport
) or as a standalone utility. The Viewport
utility performs multiple system tasks, primarily via an RS-232 or TCP/IP
connection between the control system and a PC. It is used to observe system
processes, upload new operating systems and firmware, change system and network
parameters, and communicate with network device consoles and touchpanels, among
many other tasks. Viewport can also function as a terminal emulator for generic file
transfer. All of these functions are accessed through the commands and options in
the Viewport menus. Therefore, for its effectiveness as a support and diagnostic tool,
the Crestron Viewport may be preferred over development tools when uploading
programs and projects.
1. Open the Crestron Viewport.
Either launch the stand-alone version of Viewport, or start VT Pro-e, and
from the menu bar, select
Tools | Viewport
.
2. As shown after this step, select
File Transfer | Send Pages to ML-500…
File Transfer | Send Pages to ML-500 Command
3. The “ML-500 Transfer” window appears as shown in the following graphic.
Programming Guide – DOC. 6263
Mini LCD RF Wireless Handheld Remote: ML-500
•
21