Mini LCD RF Wireless Handheld Remote
Crestron
ML-500
Hard Key Button Presses
ON
OFF
8
7
+10
0
4
1
a
2
5
h
d
MENU
INFO
9
ENT
6
3
b
c
EXIT
PREV
CH
+
-
VOL
MUTE
GUIDE
+
CH
-
Pressing a hard key sends a unique signal to the control system that is determined by
the page location shown on the LCD. A hard key can be programmed to send
different commands for the MAIN page, a Grp1 page, a Grp2 page, etc. For example,
if the ON button is pressed while viewing the MAIN page, the signal
“MAIN_PowerOn” will go high. If the ON button is pressed while viewing a page in
the Grp3 group, the signal “Grp3_PowerOn” will go high.
NOTE:
Hard key button presses will continuously send signal pulses as long as a
button is held.
If a hard key is not defined, the button will have no function when pressed.
ML-500 Digital Output Signal Descriptions
BUTTON PRESS
OUTPUT
DESCRIPTION
XXXXX_PowerOn*
Goes high when the
ON
button is
pressed.
XXXXX_PowerOff*
Goes high when the
OFF
button
is pressed.
X*
Goes high when the
CH+
button
is pressed.
XXXXX_Ch-*
Goes high when the
CH-
button
is pressed.
XX*
Goes high when the
VOL+
button is pressed.
XXXXX_Vol-*
Goes high when the
VOL-
button
is pressed.
XXXXX_Mute*
Goes high when the
MUTE
button is pressed.
…
XXXXX_1 through
XXXXX_0*
Goes high when a number key (
0
through
9
) on the numeric
keypad is pressed.
XXXXX_PrevCh*
Goes high when the
PREV CH
button is pressed.
ON
OFF
+
CH
CH
-
+
VOL
-
VOL
MUTE
1
0
PREV
CH
(continued on next page)
12
•
Mini LCD RF Wireless Handheld Remote: ML-500
Programming Guide – DOC. 6263